Compared with the chaotic light beam with multiple-row design, the single-row chips design with our Osram P8 chips could provide a more focused spot beam and a wider flood beam, make it a great choice for overlanding, off-roading and any outdoor recreations. Die-cast Aluminum Structure -- Superior Quality.Whole aluminum alloy housing with anti-scratch PC lens could resist the damage of falls and impact. Stainless steel mounting brackets provide a stable support that is not easy to fall or shake. No Screw Design+Rubber Seal Strip -- Waterproof+Dustproof. Compared with common screw fixing design, we adopt no screw deisgn with rubber seal strip, which not only has better aprearance, more important, it has better waterproof and dustproof effect. This design elimanates the possibility of water from the screw into, even in extreme weather (tested temperatures from -40 to 185 degrees F). You don't need to worry about rain, wind, or sand while off-roading. Type: Lasfit 52 Off-road Spot Flood Combo LED Light Bar. LED Chips: 50pcs OSCONIQ® P 3737 LED.
Material: Aluminum Housing+Anti-Scratch PC Lens+Stainless Steel Bracket. Placement on Vehicle: Bullbar, Bumper, Grille, Roof. Lumens: 26100lm (Theoretical)/14230lm(Actual). 1 Set of Mount Bracket Hardware.Left: Universal Tube Clamp Brakcet for Work Light. Designed to fit 0.875", 1", 1.25", 1.5", 1.625", 1.75", 2", 2.5", and 3 diameters, our Tube Clamp Mounts work perfectly with most popular off-road lights.
Superior conductivity and thermal, the PVC insulation sheath can withstand a temperature of up to 85? And a voltage of 300V, has the characteristics of alkali resistance, oil resistance, flame retardancy, and leakage prevention. Are Light Bars for Vehicle-Specific?Not at all - they're designed to be versatile, and you can install one on any truck make or model. But they do come in multiple sizes for use on different vehicles, and are available with either vehicle-specific brackets or location-specific mounting brackets.
LED light bars are a versatile piece of lighting equipment, and because they're highly waterproof and dustproof, they can be used on a wider range of applications. There are many bracket styles available to choose from, based on what you drive and where you want to mount your LED light bars.What Sizes of Light Bars are Available? Lasfit Light bars come in a vast range of sizes, from as small as 12 inches to lengths of 50 inches. The longer the bar of LED lights you install, the brighter the lighting - and the more current it will draw from your vehicle's battery. However, illumination and power requirements aren't the only considerations when choosing a size. You also need to make sure the length is a good fit for your truck.
What Beam Patterns Do LED Lights Produce? Some light bars have spot beams, which are narrow, yet reach a long distance. Others feature flood beams, which shine light over a wider area. As a general rule, spot lights are better for on-road driving, while flood lights are better-suited for off-roading. Lasfit light bar choose a model with a combination beam pattern, as that way you'll have both spot and flood lighting.
How Do You Mount a Light Bar? Off-roaders often mount bars on top of their trucks, but some choose to place their LED lights on a bull bar, atop the bumper or just above the windshield. As for mounting options, you have a range of options, including bolt-and-lock fasteners and clamp mounts. In addition, some styles can be mounted without drilling - they attach with suction cups inside the vehicle or with magnets on the exterior.
But if you plan to drive at high speeds or over exceptionally rough terrain, a permanent mount is recommended. Remember to use large-enough wires, fuses and switches for the required load, and prior to installation. The general recommendation is that whenever possible, use dedicated, fused wiring, with a relay. This ensures the circuit is protected and you pull plenty of power to the light bar. How Durable are Lasfit LED Light Bars?
When you're off-roading, you're often driving on difficult terrain. LED light bars can handle any conditions you might encounter when you go off the beaten path. They can take a great deal of abuse - even minor impacts - without suffering damage, as the rugged housing offers exceptional protection. With exterior durability and high-quality interior components, LEDs shine brightly for up to 70,000 hours. Can Light Bars Work with Other Vehicle Lights?You can easily integrate a bar with other auxiliary lighting, and the LED lights will function in unison. To integrate everything, all you need is a switch panel or control box.
Lasfit designed a dedicated integrated auxiliary switch for the Jeep Wrangler, Please consult us for details. Will an LED Light Bar Drain Your Vehicle's Battery? A single bar - even one of the larger models - isn't much of a power hog, as LED lights are extremely efficient. However, if you plan to go off-roading quite frequently or blast the stereo with your lights, you may want to invest in a second battery. A dual-battery setup also makes good sense if you're going to install other auxiliary lighting, as you may need the additional power.
What are the Laws on Light Bars? The regulations you need to follow depend upon where you live. In some areas, auxiliary lighting must be covered when driving on public roads. In others, leaving your LEDs off when you're in the city is enough to avoid a ticket. We recommend checking with your local law enforcement agency and learning the rules for your region before purchasing any LED lights.
To avoid initiating an unpaid item claim, please pay within 7 days. We will solve the problem! We always put our customers first and your satisfaction is guaranteed.Our Lasfit Tech's are here to serve you. All off-hours emails will be answered within 24-48 hours.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Accessory Lighting\Light Bars". The seller is "autoparts-onlineshop" and is located in this country: US. This item can be shipped to United States, Canada, Mexico.